What are PFAS?

PFAS are a group of man-made chemicals used in a variety of consumer products and industries throughout the world. Two PFAS chemicals, perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), were extensively produced and are the most studied and regulated of these chemicals. Many other PFAS exist. These PFAS are contained in some firefighting foams used to extinguish oil and gas fires. They have also been used in a number of industrial processes, and to make carpets, clothing, fabrics for furniture, paper packaging for food, and other materials (e.g., cookware) that are resistant to water, grease, and stains. Because these chemicals have been used in many consumer products over the past 50 years, most people have been exposed to them.

Why are PFAS a concern?

  • PFAS are referred to as “forever chemicals,” meaning that when they contaminate soil or groundwater, they do not easily break down or degrade into a less harmful chemical form.

  • Unsafe storage, improper disposal, and inadequate containment of these chemicals has resulted in contamination of soil, waterways and groundwater supplies in some locations.

  • PFAS-contamination can migrate to groundwater and surface water supplies and affect the safety of drinking water.

  • PFAS are not currently regulated as hazardous substances by the federal government, so there are no national regulations to control PFAS pollutants in water, land or air. This makes it difficult to track where PFAS are used.

How did PFAS end up in our environment?

Industrial & Firefighting Uses

  • In the United States, the most significant sources of known PFAS contamination are facilities that manufacture the chemicals and large military bases that conduct extensive firefighting training activities.

  • Often chemical manufacturing facilities did not have adequate waste storage and disposal practices, which resulted in PFAS-contaminated soil, groundwater and surface water in certain locations.

  • In the 1990s, scientists began identifying PFAS in people’s blood. Since then, studies began finding health effects related to exposure to high levels of the chemicals, such as near PFAS manufacturing plants, and military bases that conduct frequent firefighting training.

  • In the 2000s, chemical manufacturers voluntarily phased out two commonly used PFAS compounds, perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA), that were shown to be present in people and persistent in the environment. These were replaced with versions of PFAS thought to be less persistent and toxic.

Consumer Uses

  • PFAS' water- and grease-resistant properties made it popular to use in consumer products.

  • Examples of its use in products include:

    • Water-repellant sprays for footwear, fabrics and outerwear

    • Stain-resistant carpets and nonstick cookware

    • Food packaging

    • Polishes, waxes, and cleaning products

  • When consumers use products that contain PFAS, the chemicals end up in landfills and wastewater treatment plants, where they can further contaminate groundwater and surface water.

How are people exposed to PFAS?

Potential Exposure to PFAS in Contaminated Drinking Water

  • Human exposures to high levels of PFAS have been documented in places near facilities known to manufacture PFAS chemicals and military bases with extensive firefighting training activities.

  • High levels of PFAS in drinking water is the pathway of exposure of greatest concern. Researchers are still studying the extent to which this pathway impacts human health.

Can I get tested for PFAS?

  • If tested, most people in the U.S. would have PFAS measured in their blood. Since there are no health-based screening levels for specific PFAS, health care providers cannot interpret blood tests to say what the results mean for health. Tests cannot be used to diagnose if PFAS are the cause of adverse health effects.

  • Testing for PFAS exposure is not a routine clinical test. Testing blood for PFAS levels requires services of a specialized laboratory. It is unlikely that health insurance would cover the testing cost.

What is Oregon Doing About PFAS?

  • Between 2013 and 2015, all larger public drinking water systems and several smaller systems in Oregon overseen by the Oregon Health Authority (OHA) were required to monitor for six PFAS under the EPA’s Unregulated Contaminant Monitoring Program. None of the Oregon public water systems had detectable levels of the chemicals using the best testing methods available at the time. For more information, see the OHA Drinking Water Services emerging contaminants webpage.

  • OHA Environmental Public Health is providing toxicological and health education support to DEQ and other partners who are working to understand and reduce potential PFAS-related exposures at specific sites and statewide.

  • The Oregon Department of Environmental Quality (DEQ) is working with landowners of several sites in Oregon where PFAS have been found in one or more of the following media: groundwater, soil, surface water and stormwater. Contamination at these sites appears to be related to firefighting foam. Landowners are voluntarily assessing the contaminated sites with DEQ oversight and consultation as part of voluntary investigations of historical firefighting foam use and storage areas. DEQ is also tracking proposed actions by the federal government and other states to determine how they may best support Oregon’s needs.

  • DEQ’s Toxic Reduction and Safer Alternatives programs are also working to identify alternatives for PFAS in food packaging; coordinating with the state of Washington on PFAS-related efforts; collaborating with the Interstate Chemicals Clearinghouse and other states to assess firefighting foam alternatives; promoting awareness that individuals can purchase PFAS-free consumer products; and promoting PFAS-free materials in state purchasing contracts.

What are Other Government Agencies Doing?

  • Currently, there are no federal drinking water standards for PFAS. Nor have they been formally regulated by federal agencies that control hazardous pollutants in water, land or air.

  • The U.S. Environmental Protection Agency (U.S. EPA) in 2016  issued drinking water health advisories for PFOS and PFOA that set a non-regulatory advisory level of 70 parts per trillion (ppt), individually or combined. For more information, see the OHA Drinking Water Services emerging contaminants webpage.

  • In February 2019, the U.S. EPA issued its PFAS Action Plan, that outlines steps the federal government is taking to address public health. This includes considering more regulation of the use of PFAS, enforcing cleanup at contamination sites, additional monitoring of drinking water, further research to manage risk from PFAS and development of risk communication tools.

  • Several states, particularly those with PFAS manufacturing facilities or large military bases with high use of firefighting foam, have enacted drinking water standards more stringent than EPA’s advisory (Vermont, California, Minnesota).

source: Oregon Health Authority